Go to content Go to navigation Go to search
Miba Standorte MIBA SITE MAP

You are in: home » Custom Built Systems

Custom Built Systems



Teer Coatings Ltd is a leader in the design and manufacture of custom vacuum coating equipment, with over 20 years of experience in this field. In addition to manufacture of the range of equipment based around the closed field system Teer also offer a custom vacuum system building service.

Service offered

• Systems built to specific customer requirements
• Multiple magnetron systems
• Roll coaters
• Systems for sheet materials and special substrates
• Upgrade and refurbishment of customer systems
• Load lock systems
• Installation of magnetrons into existing systems
• Conversion of systems to the closed field system

Examples of recently built systems

Load lock barrel coating system with component heating facilities.

This system is installed at Welwyn Components Ltd

System for coating onto large number of very small items using a technique of sputtering downwards.

This system was designed to meet a specific customer requirement and is presently in use at Teer Coatings Ltd. The requirement was for coating on one side of very small items, which could not be jigged using the standard method. Removing one of the standard magnetrons and replacing this with five magnetrons for downwards sputtering enabled this system to be used for rapid coating onto thousands of the customer’s parts per run. This system can also be used in the standard configuration.

Ion assisted and electron beam deposition systems for optical coatings, installed into clean room conditions.

Very large six magnetron system for rapid deposition of low friction coatings.

This system, incorporating the patentaed closed field system, was designed specifically for high production deposition of the solid lubricant coatings MoST and Graphit-iC. The chamber is 1355mm high and 910mm in diameter, which houses the six magnetrons, each 900mm long and 175mm wide, and has customer specified pumping.


All Custom Built System enquiries should be directed to the relevant Sales Manager:
Mr. Romain Waidelich
Tel: 0049 151 43126823
Email: romain.waidelich@miba.com


ISO 9001:2008 No11398/0

Tel +44(0)1905 827550
Fax +44(0)1905 827551
tcl@miba.com

Site Map . Terms & Conditions . Registered Office: England . Registration Number: 1643376 . Website by Graphite